KBS Coatings - Rust Prevention - Tank Sealer
Prep Products
Rust Prevention
Tank Sealer
Topcoats
Motorcycle Resto Kits
Cavity Wax
Clear Coats
Engine Paint
High Temperature Paints
Self-Etch Primers
Paint/Tank Stripper
Restoration Kits
Epoxy Putty
Spray Guns
Thinners
Disposable Gloves
Work Gloves
Supplies
KBS Gear
KBS Work Gear
All Instruction Pages
Application Flow Charts
Instructional Videos
The KBS 3 Step
Rust Prevention System
The KBS 3 Step
Tank Sealing System
Spraying Guidelines
KBS Klean
RustBlast
RustSeal
RustSeal on Concrete
Tank Sealer
DF Clear Coat
DF Top Coat
BlackTop
Strip
NuMetal
BackBone
Fusion SEP
Motor Coater
XTC
Step-by-Step Procedure
1-877-548-9323

KBS COATINGS - PAINT OVER RUST - STOP RUST

Stop Rust with KBS RustSeal

Experts worldwide agree that the TWO key components to Stopping Rust:

  • Proper surface PREPARATION
  • Permanent SEPARATION of water & oxygen from metal.

RustSeal will provide superior rust protection when coated directly over a minimally prepared surface, but KBS Coatings' unique 3 Step System offers the proper surface preparation and unmatched ability to Stop Rust.

This Proven 3-Step System Includes:

  • KBS Klean - a water-based cleaner/degreaser
  • RustBlast - a powerful, water-based, rust remover and zinc phosphate pre-primer & metal etch
  • RustSeal - a one part, ready-to-use, high-solid content, rock-hard, paint over rust coating.

The KBS Stop Rust 3 Step System

KBS Coatings rust prevention products are designed to work as a COMPLETE SYSTEM.

RustSeal will provide superior rust protection when coated directly over a minimally prepared surface, but KBS Coatings' unique 3 Step System offers the proper surface preparation and unmatched ability to Stop Rust.

When used together, these products provide you with a coating that will not only STOP RUST, but will protect it from returning. To aid you in your particular rusty metal project, we have included the following steps to explain the various stages in rust prevention.

For an overview of the KBS 3 Step System, be sure to also check out the KBS Flow Chart.

KBS 3 Step System

Step #1 - KBS Klean

KBS Klean should always be diluted with water. For general purpose cleaning, apply liberally and wash surface for 5-10 minutes. For heavy-duty cleaning, extended soaking times up to 24 hours or more may be necessary. Use a bristle brush or scouring pad to expedite the cleaning of heavily soiled surfaces. Retreat surface as necessary until clean.

Do not allow KBS Klean to dry before rinsing. Rinse thoroughly with water after cleaning and let dry.

KBS Klean - Cleaner and Degreaser

Step #2 - RustBlast

RustBlast - Metal Prep - Acid Etch

Liberally apply RustBlast FULL-STRENGTH to a DRY surface using a spray bottle, brush, roller, or backpack sprayer for larger applications.

Re-apply often and as needed to keep the surface wet for a minimum of 10 minutes for smooth or lightly rusted surfaces, 20-40 minutes for moderately rusted surfaces and 1-2 hours for  heavily rusted or corroded surfaces. DO NOT allow surface to dry.

After treatment, rinse thoroughly with water and then allow surface to dry completely.

RustBlast - Metal Etch - Acid Etch

Step #3 - RustSeal

Apply RustSeal to prepared surfaces by brush, roller, or spray equipment. Brush marks will level out as if sprayed.

Always apply a MINIMUM of 2 full coats (2 mils each) for general applications. For marine or industrial applications, apply a minimum of 3 full coats (3 mils each). Recoating can be done once the first or consecutive coat is dry-to-touch.

RustSeal - Rust Prevention

KBS Directions & Technical Information

+KBS Flow Charts

+The KBS Support Forum

+KBS FAQ's

+Directory of KBS Directions

+Spraying Guidelines

+Using RustSeal to Seal Concrete

+RustSeal Chemical Resistance Guide

+RustSeal Technical Data

+KBS How-To's

KBS Products: Frame Paint - Chassis Paint - Car Gas Tank Sealer Kits
RustSeal from KBS Coatings
+RustSeal
RustBlast - Metal Etch
+RustBlast
DiamondFinish Clear - Clear Coat Paint
+DiamondFinish Clear Coat
Cycle Tank Sealer Kit
+Cycle Tank Sealer Kit
XTC - Xtreme Temperature Coating
+XTC - Xtreme Temperature Coating
Fuel Tank Sealer Kit
+Auto Fuel Tank Sealer Kit
All-In-One Kit - Chassis Paint
+All-In-One Chassis Kit
Engine Paint Kit
+Motor Coater Kit
Frame Coater Kit
+Frame Coater Kit

And Much More ...

Search KBS FAQ's
KBS Support Forum
Fix-It Guides
Submit Support Ticket
Email Newsletter
Free Catalog
FREE Catalog - KBS Coatings
KBS Coatings on Facebook

Facebook

KBS Coatings on Twitter

Twitter

KBS Coatings on Google Plus

Google Plus

KBS Coatings on YouTube

YouTube

KBS News / KBS Blog
Mail/Fax Order Form
Before/After Pictures
About Us
Contact Us
MSDS Sheets
Shipping Info
Customer Before &
After Photos
What Others Are Saying About KBS Coatings
What Is Being Said About KBS Coatings in Magazines
Find a KBS Reseller
Near You
How Do I Become
A KBS Reseller?
KBS Coatings - Germany

Germany

KBS Coatings - Canada

Canada

KBS Coatings - Denmark

Denmark

KBS Coatings - Denmark

UK

KBS Coatings - Benelux

Benelux